Description
- Compact design - rugged construction - Small foot print takes up less bay space while still allowing best in class weight capacities. Only 78 3/4” / 2000mm wide x 86 1/2” / 2200mm long.
- Versatility and ease of use - Ideal for small compact cars up to light duty trucks with pull out extensions allowing ease of use on short or long wheelbase vehicles. No tie bar or floor obstruction.
- Volumetric control stays level all the time - Thanks to single cylinder with dual chamber, unit stays level all the time. No electronic sensors required on the lift.
- Lower maintenance - less downtime - No Electronic sensors, No equalization valve, Extra-large pins with accessible grease fittings makes this ideal equipment for high duty cycle shops who require less downtime. Built for safety - 5 locking positions ensure side to side stability and eliminates accidental lowering of the lift. Single point air cylinder lock release.
- Unobstructed access - Open front and rear construction with no tie bars or torsion rods allows for unobstructed access to the underside of most vehicles with 27”/ 686mm to 38” / 965mm of working area between the superstructures. Easy vehicle spotting - The flat deck platform and “spotting blocks” allows quick set-up by the operator increasing bay productivity.
- Low profile approach ramps or flush mount options - The low profile ramps 4-1/8” / 105mm collapsed height allow for accessibility of smaller compact cars while still allowing for heavier loads. The lift can also be flush mounted for the ultimate is productivity and space saving bay solutions.
| Capacity | 6,600 lb. / 3.0Kg |
| Power Supply | 220V 12 Amp 2HP/ 1.5 kw |
| Hydraulic Cylinders | 2 - 3” x 15” long / 76mm x 381mm long |
| Lifting Time | 25 Seconds (220v) |
| Overall Width | 78-3/4” / 2000mm |
| Overall Length | 86-1/2” / 2200mm |
| Drive Over Height | 4-1/8” / 105mm |
| Overall Lifting Height | 39-3/8” / 1000mm (42” / 1066mm with adapters) |
| # of Mechanical Locks | 5 |
| Lock Release | Air cylinder lock release |
| Finish Coating | Double bake powder coat - red |
| Height Adapters | 4” / 101mm Rubber covered blocks |
| Lifting Pad Dimensions | 61” to 82-1/2” Extended x 23-1/2” wide / 1550 to 2100mm Extended x 597mm wide |
| Equalization | Volumetric |
| Available In Flush Mount | Yes |
| Pull Out Deck Extension | Yes |
| Arm Reach Side To Side | N/A |
| Optional Light Truck Frame Adapter | Yes |
| Shipping Weight | 850 lb. / 350kg |
| Lubrication | Accessible “zirk” grease fittings at hinge points |
| Approvals UL/CSA/CE | Yes |
 |
 |
|
| Air Release Mechanical Locking | Light Truck Frame Adapter |
